You are here: HomeProducts OverviewIndex › No Space for Compromises: Bartels Micropump

No Space for Compromises: Bartels Micropump

Mar. 08, 2010
mp 5
mp 5 more
mp 5 mp 6 

Based on the piezomembrane principle Bartels Mikrotechnik offers two types of micropumps, the mp5 and mp6. The small power packs exhibit a flow performance of 5 respectively 6 ml/minute and can deal with a back pressure of 250 respectively 550 mbar, offering universal capabilities for liquids and gases. The pumps are ingeniously simple and their advantages are next to the small size and low weight its robustness, long lifetime and high reliability.

The pumps are driven via frequency and amplitude allowing flexible adjustment in accordance to the system requirements at low energy consumption. Different control units are offered, also battery powered versions for use in portable devices.

Build from plastics, with only one material (PPSU) in contact with the pump medium, the automated serial production offers unbeatable cost effectiveness.

Performance data:

General mp5 mp6
type
piezoelectric diaphragm pump
pump medium liquids or gases liquids, gases and mixtures
outer dimensions
(without fluidic connectors)
14 x 14 x 3.5 mm3 30 x 15 x 3.8 mm3
fluidic connectors tube clips, 2 mm outer diameter tube clips, 1.6 mm outer diameter
operating temperature 0 - 70 °C
life time > 5000 h
materials in contact with media PPSU/PI/NBR PPSU
particle tolerance ø < 50 µm
max.

flow, water1

5 ml/min (100 Hz) 6 ml/min (100 Hz)
max. pressure, water1 250 mbar (100Hz) 550 mbar (100 Hz)
max. flow, air1 15 ml/min (300 Hz) On request
max. pressure, air1 30 mbar (300 Hz) On request

Content is subject to changes without notice.

1Values taken with electronic controller mp-x set to 250 V amplitude, SRS signal

Keywords : Bartels Mikrotechnik micropumps

Email requestCompany Homepage

Bartels Mikrotechnik GmbH
Emil-Figge-Straße 76a
44227 Dortmund
Germany

Tel: +49 2 31 97 42 500
Fax: +49 2 31 97 42 501
Web: www.bartels-mikrotechnik.de

RSS Newsletter