You are here: HomeProducts OverviewProduction › Control / Automation

Products - Control / Automation

Page(s):1 | 2 | | »
 Intrinsically Safe HMI Devices from Siemens for Hazardous Areas
14.07.2010

Intrinsically Safe HMI Devices from Siemens for Hazardous Areas

The new embedded SIMATIC HMI Panel PC Ex and HMI Thin Client Ex are completely maintenance-free and require no special measures such as complicated and expensive casings or additional certification procedures. They can be deployed directly in the hazardous areas of Zones 1/21 and 2/22, subject to combustible gases, vapors and dust/air mixtures, for example, or in the manufacture of petroleum, medicines and cement, as well as in marine applications. more
07.07.2010

Emerson to Help Customers Convert Biomass To Low-Cost Energy

Emerson Process Management is expanding its energy management portfolio with new technologies and services that help companies and municipalities convert low-cost waste and biomass into renewable energy more efficiently and reliably, with lower carbon emissions. more
Not a Question of Taste
30.06.2010

Not a Question of Taste

The position of the control valve in flowmeters can be crucial when measuring gas flow, regardless of whether the valves are built into the device or separate. If a valve is used to reduce the flow at the inlet of the measuring device, the pressure in the measuring tube behind the valve is reduced. Because gases are compressible, this change in operating pressure results in a significant measurement error. more
Connecting Modular I/Os to Profinet via SCRJ
15.06.2010

Connecting Modular I/Os to Profinet via SCRJ

The new I/O bus coupler for Profinet with IP20 protection from Phoenix Contact serves as a link between the I/O level and Ethernet. It is designed to connect up to 62 or 16 functional units, such as digital and analog inputs/outputs and counters, to the network via the SCRJ plug connector. more
Thermatel TA2 Thermal Mass Flow Meter Measures Greenhouse Gas
19.04.2010

Thermatel TA2 Thermal Mass Flow Meter Measures Greenhouse Gas

Magnetrol International announces that their Thermatel Model TA2 Thermal Mass Flow Meter measures greenhouse gases in accordance with the new U.S. Environmental Protection Agency rule (EPA 40 CFR part 98). This new mandate requires companies emitting more than 25,000 tons/year of CO2 equivalent to report greenhouse gas emissions effective January 1, 2010. more
Intrinsically Safe Profibus Gateway
01.04.2010

Intrinsically Safe Profibus Gateway

Turck has introduced a new intrinsically safe Profibus-DP gateway for its zone 1 remote I/O system, excom. At the core of the GDP-IS is a new microcontroller that enhances the performance remarkably and enables an even better availability of the complete system. Due to their 100% downward compatibility, already existing gateway variants can be replaced by the new solution. In spite of the new functionality, the GDP-IS has a lower dissipation loss, because the power consumption is 1W at maximum. more
Coda: Turnkey Solution for Data Acquisition, Signal Analysis and Process Monitoring
08.03.2010

Coda: Turnkey Solution for Data Acquisition, Signal Analysis and Process Monitoring

Are you searching for a system that allows you to set up and perform comprehensive measurements, analyze measuring data and visualize and document results in no time? Then benefit from the outstanding performance and functionality of our turnkey Coda solution: • Measurement of any physical quantity: temperature, strain, pressure, force, acceleration, rotation, frequency, power, etc.
• Tools for efficient parameterization of many hundreds of channels, import of parameterizations e.g. by means of Excel files. more
Signal Analyzer with New Enhancements
04.02.2010

Signal Analyzer with New Enhancements

m+p international's SO Analyzer is the perfect choice for accurate and efficient noise and vibration measurements, third-party data import/export, noise and vibration analysis and reporting of your results in a single package. It covers the widest range of applications in today's dynamic signal analysis and is designed for use in the field and in the lab. SO Analyzer Rev. 4.0 introduces a lot of new useful capabilities and enhancements to the noise and vibration analysis software, including: more
Page(s):1 | 2 | | »
RSS Newsletter